simultaneously after washing programme has started. 1. The 1st Auxiliary Function light flashes continuously.
To deactivate the Child Lock:
Child lock must be deactivated to start a new programme after the programme has finished or to interrupt a running program. Press and hold 1st and 2nd Auxiliary Function buttons for 3 seconds simultaneously to disable child lock.
Progress of programme
Progress of a running programme can be followed from the Programme Follow- up indicator. At the beginning of every programme step, the relevant indicator light will turn on and light of the completed step will turn off.
To change the auxiliary function, speed and temperature settings while a program is running, you need to switch the machine to Pause mode. Press Start / Pause / Cancel button to switch the machine into Pause mode. In this case, Start / Pause / Cancel light flashes.
C If the machine does not pass to the spinning step, Rinse Hold function might be active or the automatic unbalanced load detection system might be activated due to the unbalanced distribution of the laundry in the machine.
Loading door lock
There is a locking system on the loading door of the machine that prevents opening of the door in cases when the water level is unsuitable.
When machine is switched to Pause mode, it checks the level of the water inside. If the level is suitable, Loading Door light illuminates steadily within
If the Loading Door light is not on, Loading Door cannot be opened. If you are obliged to open the Loading Door while the Loading Door light is off, you must cancel the current programme; see "Canceling the programme".
Changing the selections after programme has started
To change your settings after the program has started, you have to switch the machine to Pause mode first.
C Even if you select a new program by changing the position of the Programme Selection knob while the machine is running or in Pause mode, the programme selected first will continue. You must cancel the current programme to change the washing programme. See "Canceling the programme".
Changing the auxiliary function, speed and temperature
Depending on the step the programme has reached, you may cancel or activate the auxiliary functions; see, "Auxiliary function selection".
You can also change the speed and temperature settings; see, "Spin speed selection" and "Temperature selection".
Adding or taking out laundry
1.Press Start / Pause / Cancel button to switch the machine to pause mode.
2.Wait until the Loading Door can be opened.
C If the Loading Door light does not turn on in
3.Open the Loading Door and add or take out the laundry.
4.Close the Loading Door.
5.Make changes in auxiliary functions, temperature and speed settings if necessary.
6.Press Start / Pause / Cancel button to start the machine.
23
EN
