Electrolux S 75400 KG Problem, Possible cause, Solution, The appliance is not supported proper

Problem	Possible cause	Solution
The compressor oper- The thermostatic control is set wrong-		Set the thermostat knob to a position
ates continually.	ly.	that gives higher temperature.
	Doors are not shut properly or do not	Check if the doors close well and the
	close tightly.	gaskets are unhurt and clean.
	Products in big quantity to be frozen	Wait some hours and then check the
	were put in.	temperature again.
	Too warm food was put in.	Put food at max. room temperature.
The appliance does	Plug is not connected to the mains	Check the connection.
not work at all.	socket properly.
Neither cooling, nor	The fuse burnt out.	Change the fuse.
lighting works.
	The thermostatic control is not on.	Start the appliance according to
		instructions in chapter 'Putting it into
		use'.
	Electrical network broke down.	Get an electrician to check it.
The appliance is	The appliance is not supported proper-	Check if the appliance stands stable
	ly.	(all the four feet should be on the
noisy.
		floor).

Inasmuch as the advice does not lead to result, call the nearest brand-mark service.

28