Samsung RFG298AARS Controlling The Temperature, Energy saver, Lighting, Alarm, Fridge Ice off

Energy saver

This icon will light up when you activate the “Energy Saver” function. The Energy Saver function is automatically set to “ON” when power is supplied to the Refrigerator. If condensation occurs on the doors, turn the Energy Saver function off.

Lighting

This icon will light up when you activate the “Lighting” feature. In this case, the dispenser light(under the display) will be on constantly. If you would like the dispenser light to come on only when using the dispenser, turn the “Lighting” feature off.

Alarm

This icon will light up when you activate the “Alarm” feature. The door alarm will sound if any door is open for more than 3 minutes. The beeping stops when you close the door. Initially the Alarm is set to on.

Fridge Ice off

This icon will light up when you activate the “Fridge Ice Off” feature. In this case, the fridge ice will not be produced.

Freezer Ice off

This icon will light up when you activate the “Freezer Ice Off” feature. In this case, the freezer ice will not be produced.

•Due to dual Ice Maker, it could spend more energy. So, we recommend if you have enough ice, use Ice Off mode that could save energy.

•Ice dropping from Ice Maker and water pressure that supplied from your house could make some noise like sound of water flow or hit something. It is not out of order, just different circumstance could make that noise.

Lock

This icon will light up when you activate the “Lock” feature. In this case, you won’t be able to use the control panel. If you press and hold the Ice Off/Hold button for 3 sec to unlock Child Lock, you will be able to use the control panel again.

CONTROLLING THE TEMPERATURE

Basic temperature of Freezer and Refrigerator Compartments

The basic temperature and/or recommended temperature of Freezer and Refrigerator Compartments are -2°F and 38°F respectively.

If the temperature of Freezer and Refrigerator Compartments are too high or low, adjust the temperature manually.

Controlling the Freezer temperature

The Freezer temperature can be set between 8°F and -8°F to suit your particular needs. Press the Freezer button repeatedly until the desired temperature is shown in the temperature display. The temperature will move 2°F degrees each push (-2°F → -4°F → -6°F → -8°F → 8°F → 6°F → 4°F → 2°F → 0°F → -2°F). Keep in mind that foods like ice cream may melt at 4°F. The temperature display will move sequentially from -8°F to 8°F. Five seconds after the new temperature is set, the display will show the actual current freezer temperature until the new temperature is reached.

Using the Power Freeze

If you need a lot of ice or if you want cool down more faster, you can
use Power Freezer function. Press and holding the Freezer/Hold 3
sec for Power Freezer button for 3 seconds. Then, power freezer
indicator will lit and activate the power freeze mode independent
of freezer set temperature. If you select Power freeze, the inside
temperature of the freezer will decrease for about two and a half
hours. When you have enough ice, just press and holding the button
for 3 seconds again to cancel the Power Freeze mode. Then,
indicator will stop lit and activate for freezer setting temperature again.	Operating _23

OPERA02 G TIN