Samsung RFG298AARS CHECKinG tHE wAtER DisPEnsER LinE, Setting up your French Door Refrigerator

Models: RFG298AARS

1 46
Download 46 pages 22.56 Kb
Page 18
Image 18
CHECKinG tHE wAtER DisPEnsER LinE

Setting up your French Door Refrigerator

CHECKinG tHE wAtER DisPEnsER LinE

A water dispenser is one of the helpful features on your new Refrigerator. To help promote better

health, the water filter removes unwanted particles from your water. However, it does not sterilize or destroy microorganisms. You may need to purchase a water purifying system to do that.

In order for the ice maker to operate properly, a water pressure of 20~125 psi is required. Under normal conditions, a 170 cc (5.75 oz.) cup can be filled in 10 seconds.

If the Refrigerator is installed in an area with low water pressure (below 20psi), you can install a booster pump to compensate for the low pressure.

Make sure the water storage tank inside the Refrigerator is properly filled. To do this, press the water dispenser lever until the water runs from the water outlet.

Water line installation kits are available at extra cost from your dealer. We recommend using a water supply kit that contains copper tubing.

Connecting to the water supply line

1.First, shut off the main water supply line and turn the ice-maker off.

2.Locate the nearest cold water drinking line.

3.After connecting the water supply to the water filter, turn your main water supply back on and flush four or more gallons into a bucket to clear and prime the water filter.

1Cold water line

2 Pipe clamp

4Shut off valve

3 Water line installation kit

18_ Setting Up

Page 18
Image 18
Samsung RFG298AARS user manual CHECKinG tHE wAtER DisPEnsER LinE, Setting up your French Door Refrigerator