REMOVING THE FREEZER ACCESSORIES
1. Tilting Pocket
To remove - Pull both brackets( 1 ) upward until you hear a clicking sound and remove the pocket
To replace - Hook the ends of the pocket into both brackets ( 1 ) and push down until it locks into place.
OPERA02
|
| G |
| 1 | TIN |
|
| |
2. ICE BUCKET | 1 | 2 |
To remove - Lift the ice bucket( 1 ). |
| |
|
| |
To relocate - Place the ice bucket into the Super extended drawer( 2 ). |
|
|
3. Super Extended Drawer |
|
|
To remove - Pull the drawer out to full extension. |
|
|
Tilt up rear of drawer and lift straight out. |
|
|
To relocate - Place the drawer onto the rails( 4 ) by tilting it up. Lower | 3 |
|
the drawer into place until it is horizontal and slide the |
|
|
Drawer( 3 ) in. |
|
|
|
| 4 |
3. Freezer Drawer Bin
To remove the drawer - Pull the drawer out fully. Tilt up the rear of the bin and lift it out to remove.
To relocate the drawer - Place the bin into the rail assembly.
To remove the divider - Pull the divider straight up.
1
2
To relocate the divider - Hook the top corners of divider( 1 ) over the hole of the bin( 2 ).
CAUTION
WARNING
Do not allow baby or children go inside the drawer bin. They could
damage the Refrigerator and seriously injure themselves. Do not sit on the Freezer door. The door may break. Do not allow children to climb into the Freezer basket.
If you remove the divider to clean the basket bin, you must reinstall the divider using 2 screws after cleaning to prevent children from getting trapped inside the basket.
Operating _31
