Operating your French Door
Refrigerator
Controlling the fridge temperature
The fridge temperature can be set between 46°F and 34°F to suit your particular needs. Press the Fridge button repeatedly until the desired temperature is shown in the temperature display. The temperature will move 2°F degrees each push(38°F → 36°F → 34°F → 46°F → 44°F → 42°F → 40°F → 38°F). The temperature control process for the Fridge works just like the Freezer process. Press the Fridge button to set your desired temperature. After a few seconds, the Fridge will begin adjusting towards the newly set temperature. This will be reflected in the digital display.
Using the Power Cool
For a quick Fridge cool down, use Power Cool function. Press and holding the Fridge/Hold 3 sec for Power Cool button for 3 seconds. Then, power cool indicator will lit and activate the power cool mode independent of fridge set temperature. If you select Power Cool, the inside temperature of the fridge will decrease for about two and a half hours or until 25°F. just press and holding the button for 3 seconds again to cancel the Power Cool mode. Then, indicator will stop lit and activate for freezer setting temperature again.
- The temperature of the Freezer, fridge or Pantry Room may rise when you open the doors too frequently, or if a large amount of warm or hot food is placed inside.
- This may cause the digital display to blink. Once the Freezer and fridge temperature return to their normal set temperatures, the blinking will stop.
- If the blinking continues, you may need to “reset” the Refrigerator. Try unplugging the appliance, wait for around 10 minutes and then plug the power cord back in.
-The temperature of the Pantry Room may be a little different according to the location inside.
-If communication between Display and Main Controller errors, Pantry Display light may blink. Once the communication return to their normal set temperatures, the blinking will stop.
If the blinking continues for a long period of time, please contact to Samsung Electronics Service Center.
USING THE COLD WATER DISPENSER
Press the Ice type or water button to select the type of you want
No ICE
Select this if you want to turn ice maker off.
Using the ice Dispenser
Place a glass underneath the ice dispenser and push gently against the dispenser lever with your glass.
Make sure the glass is in line with the dispenser to prevent the ice from bouncing out.
| • When Cubed Ice is selected after using the Crushed Ice mode, a small | PUSH |
CAUTION | amount of residual crushed ice might be produced. |
|
|
|
24_ Operating
