Auxiliary functions
Auxiliary function selection keys
11a 11b 11c 11d
•Depending on the programme, you can select the desired auxiliary function by pressing the buttons.
•Select the required auxiliary functions before starting the programme.
•Some combinations cannot be selected together. (Ex.: Prewash and Quick Wash.
•Symbol of the selected auxiliary function (Figure
Auxiliary function selection
If an auxiliary function that should not be selected together with a previously selected function is chosen, the first selected function will be cancelled and the last auxiliary function selection will remain active.
(Ex.: If you want to select prewash first and then quick wash, prewash will be cancelled and quick wash will remain active.
Auxiliary function that is not compatible with the programme cannot be selected. (see, “Programme Selection Table”)
• Prewash
When you select this function, the display will indicate “F1” symbol.
•A prewash is only required with heavily soiled laundry. Without prewash you save energy, water, detergent and time.
•Prewash without detergent is recommended for veils and curtains.
•Quick Wash
With this programme, the wash time is
shortened. “F2” symbol will light up on the display.
•Use this function for smaller amounts or slightly soiled laundries.
•Extra Rinse
This function allows your machine to perform an extra rinsing in addition to the rinsing cycles performed by your machine after main washing cycle.
Thus, the risk for sensitive skins (babies, allergic skins and etc.) to be effected by the minimal detergent remnants on the laundry is reduced. “F3” symbol will light up on the display.
• Anti- Crease
With this function, boiler movement will be lessened to prevent creasing and spinning speed is limited. In addition, washing is carried out at a higher water level. “F4” symbol will light up on the display.
•Use this function for delicate laundries that crease easily.
CWhenever you select this auxiliary function, load your machine with half of the maximum laundry amount specified in the programme table.
Time screen
The display shows the time remaining for the programme to complete while a programme is running. Time is displayed
in hours and minutes as “01:30”.
Time delay
With the “Time delay” function you can delay the programme start up to 24 hours. Setting can be made in intervals of 30 minutes.
1.Open the loading door, place the laundry inside and fill with detergent.
2.Set the washing programme, temperature, spin speed and,
20
EN
