3Installation
Removing packaging reinforcement
Tilt the machine to remove the packaging reinforcement. Remove the packaging reinforcement by pulling the ribbon.
Opening the transportation locks
CTransportation safety bolts must be removed before operating the washing machine! Otherwise, the machine will be damaged!
1.Loosen all the bolts with a spanner until they rotate freely (“C”)
2.Remove transportation safety bolts by turning them gently.
3.Fit the covers (supplied in the bag with the Operation Manual) into the holes on the rear panel. (“P”)
CKeep the transportation safety bolts in a safe place to reuse when the washing machine needs to be moved again in the future.
CNever move the appliance without the transportation safety bolts properly fixed in place!
Appropriate installation location
Install the appliance in environments which have no risk of freezing, in a stable and level position.
CThe floor must be capable of carrying the load on it!
CIf the washing machine and a drier are placed on top of each other, their approximate weight together may reach 180 kg when they are full.
Important:
•Do not place the appliance on top of the power cable.
•Keep at least 1cm distance from the edges of other furniture.
•Place the machine on a firm surface; do not position it on a long pile rug or such like surfaces.
Adjusting the feet
CDo not use any tools to loosen the lock nuts. Otherwise, they can be damaged.
1.Manually (by hand) loosen the lock nuts on the feet.
2.Adjust them until the machine stands level and firm.
3.Important: Tighten all lock nuts up again.
9
EN
