Bel Canto Design PRe2TM PRe2PTM PRe2/P Line Stage Specifications, PRe2P Phono Specifications

Specifications

PRe2/P Line Stage Specifications:

Bandwidth • DC-200KHz

Volume setting for unity gain • 100 (factory default setting)

Signal to Noise Ratio @ 2 Volt RMS • >100 dB A weighted, 20Hz-20kHz Distortion @ 2 Volt RMS/ 1kHz <0.003%

Input overload: 10 V RMS

Output Impedance: 50 Ohms

Input Impedance: 10K Ohms

Maximum Gain: 16dB

Maximum Output Level: 10 V RMS

PRe2P Phono Specifications:

Gain @1KHz • 40dB or 60 dB

Input Resistive Load • 47Kohms to 30 Ohms selectable in 16 steps Input Capacitive Load • 150 pF to 950 pF selectable in 8 steps RIAA Accuracy • +/-0.2 dB 20Hz to 20 KHz

Noise Ratio re: 5 mV in at 40 dB gain: >80dB A-weighted

Noise Ratio re: 0.5 mV in at 60 dB gain: >60dB A-weighted

Idle power draw • 21 Watts

Power Requirements • 110-120 VAC 50-60 Hz or 220-240 VAC 50-60 Hz Dimensions • 17.5” W x 14.5” D x 4.5” H (445 mm x 368 mm x 114 mm) Weight: 24lbs. (13 kg)

© 2002-2004 bel canto design, Ltd. page 10 PRe2/P User’s Guide rev072004