C) SAVE CONFIG ? Menu
This is used to Save the Setup Changes made in the menu system.
Be sure to use this to store the changes when you are satisfied with your setup. Use the UP/DOWN keys to toggle between YES or NO and save the menu settings.
Saving the settings will insure that your changes are active even if power is removed from the Pre2/P.
Press ENTER to save your configuration and exit this menu mode.
D) ERASE CONFIG ? Menu
This is used to Restore the Factory Default menu settings.
Use the UP/DOWN keys to toggle to YES or NO.
Press ENTER to erase your configuration and restore the factory settings.
Warning: This operation resets all of your custom settings.
PRe2P Phono Stage Setup
A*) PRe2P Phono Configuration Menu
This menu is used for setting up the Phono Section of the PRe2P. It is the first active menu only in the PRE2P and is not used in the PRe2.
1)Mono/Stereo mode is set by pressing ENTER and using the UP/DOWN button to select the mode.
2)Resistive Input loading. This may be adjusted by pressing ENTER and scroll-
ing through the loading options.
3)Capacitive Input loading may be set the same way.
4)Gain is set between 40 dB at 1KHz and 60 dB at 1 KHz. We suggest that you use 60 dB for cartridges with out- puts rated below
Press ENTER to exit each menu mode and use the SAVE CONFIG ? menu to save your setup.
© | page 9 | PRe2/P User’s Guide rev072004 |