Unpacking your PRe2/P
PRe2/P box contents include the following:
1 (one) - PRe2/P Analog Preamplifier
1 (one) - PRe2/P User’s Guide
1 (one) - Power cord [6.6’ - 2 meters long]
1 (one) - Remote Control
1 (one) – Warranty Sheet
Carefully unpack each piece and check for shipping damage. If there is any damage, or if anything is missing, please contact your dealer, distributor or Bel Canto Design.
IMPORTANT: Save all packing materials as the packing is spe- cially designed to protect the unit during
transportation or shipping. If the packag- ing becomes lost or damaged, please contact your dealer, distributor or Bel Canto before attempting to transport your unit.
Power Connection
The power supply on the PRe2/P is pre- set for the proper national voltage. The power cable should have the correct plug for your local power system. If you believe this to not be true, please con- tact your dealer immediately.
Warning!
Do not connect power to this preamplifier yet!
This preamplifier, like any electrical com- ponent, can be dangerous and cause injury unless correct handling proce- dures are observed and used. Before powering this preamplifier it is neces- sary to read and follow proper setup and procedures.
© | page 3 | PRe2/P User’s Guide rev072004 |