Alcatel Carrier Internetworking Solutions TQBJ0223 Before asking for service

55

ENGLISH

Before asking for service --- check the following points.

Symptoms Checks

• Is the power cord plug correctly plugged in?

• Is the MAIN POWER turned on?

• Is electricity running to the power outlet?

• Is the temperature monitor (TEMP) indicator on the front of the unit flashing or

turned on? (See page 50)

• Is the lamp monitor (LAMP) indicator on the front of the unit flashing or turned on?

(See page 50)

• Is the lamp unit door installed correctly?

• A wrong ID is set. (See pages 15 and 33)

Power does

not turn on

• Is the lens cap still on the lens?

• Is the image input correctly connected?

• Is the input mode set correctly? (See page 21)

• Is the black level adjustment set at the minimum level? (See page 27)

• Is the equipment connected to the projector operating correctly?

• Is the shutter function turned on? (See page 24)

No image

• Is the lens focused properly? (See page 23)

• Is the projection distance correct? (See page 17)

• Is the lens dirty?

• Is the projector positioned directly in front of the screen? (See page 16)

Image is blurred

• Is the colour density and colour tone setting correct? (See page 27)

• Is the equipment connected to the projector correctly adjusted?

Light colour/

bad colour tone

• Are the batteries exhausted?

• Are the battery polarities set correctly? (See page 14)

• Are there any obstacles between the remote control and the remote control

sensor? (See page 14)

• Are you trying to operate the remote control beyond its operable range?

(See page 14)

• Are you controlling from external equipment using the REMOTE2 IN terminal?

(See page 49)

• Is there any external light interfering with remote control operation?

• A wrong ID is set. (See pages 15 and 33)

• Is the on-screen display function at “OFF”? (See page 9)

Remote control

does not operate

• Is the input mode properly set? (See page 21)

• Is the correct signal system (SYSTEM SELECTOR) selected? (See page 28)

• Are there any malfunctions on the source side, such as bad video tapes?

• Are you inputting a signal that is not compatible with this projector? (See page 58)

Abnormal image

• Is the cable too long?

• Is the video output signal setting of the computer correctly set?

(Read the operating instructions of the your PC.)

Does not display

images from PCs

Contents

Main Dear Panasonic Customer: IMPORTANT SAFETY NOTICE Page Contents Precautions with regard to safety WARNING Precautions with regard to safety Caution Accessories Precautions on handling Precautions on transport Precautions on installation Disposal Precautions on use Name and function of parts Remote control Name and function of parts Bottom Front and side of the projector Status LED lights Name and function of parts Rear view of the main unit Controls on rear panel Do not place your hands or other objects close to the air outlet port. Side-mounted connection terminals Using the remote control unit Loading dry cells 1.Open battery compartment lid. 2.Insert the dry cells. 3.Close the battery compartment lid. Setting projector ID number to remote control Connect to the projector to use with a cable Installation Installation geometry Projection schemes Projection distance by projection lens Installation Calculation formulas for projection distance by lens types Connection Setup precautions Connection Example of connecting with PCs Example of connecting with AV products Projection Powering up the projector Making adjustment and selection Projection Powering off the projector Direct power off function How to adjust the lens How to install and remove the projection lens How to install the projection lens How to remove the projection lens How to adjust the FOCUS, ZOOM and SHIFT Automatic adjustment (AUTO SETUP) Using the SHUTTER function Press the SHUTTER button of the remote control or the main unit. Press the SHUTTER button again. How to adjust the lens position to the left or right On-screen menus Structure of menu screens For DVI signals POSITION (page 28) OPTION1 (page 31) Returning to the previous page Menu items shown in black characters Menu items setting Resetting to the factory default Basic menu operations Adjusting the picture PICTURE MODE CONTRAST BRIGHTNESS COLOR Adjusting the position SHIFT ASPECT SHARPNESS NOISE REDUCTION How to use ADVANCED MENU DIGITAL CINEMA REALITY BLANKING How to use ADVANCED MENU Changing the display language RASTER POSITION XGA MODE SXGA MODE INPUT RESOLUTION OPTION1 settings COLOR CORRECTION CONTRAST MODE AUTO SIGNAL BACK COLOR DVI EDID DVI SIGNAL LEVEL FUNC1 OSD POSITION OSD MEMORY OPTION2 settings PROJECTOR ID INSTALLATION ALTITUDE DIRECTION LAMP SELECT LAMP RELAY RS-232C Displaying the internal test pattern SYSTEM INFORMATION AUTO POWER OFF DATE AND TIME PASSWORD Setting the network Connecting the PC Press the ENTER button. System requirements Operation is not guaranteed for all computers that meet the above conditions. Using Web Browser Control Accessing from the Web browser Password change page Basic control page Detail control page Monitor information page Error information page E-mail set up page E-mail set up page (Continuing) Authentication server set up page Ping test page DNS server set up page Contents of mail sent Mail with the contents shown below is sent when the E-mail settings have been established. Click [Network set up], then [Adjust clock] to display the Adjust clock page. Adjust clock page Mail with the contents shown below is sent when an error has occurred. Network config page Network status page Using the PJLinkprotocol Supported commands PJLinksecurity authentication Setting the security PASSWORD PASSWORD CHANGE DISPLAY SETTING TEXT CHANGE Using the serial terminals Pin assignments and control Using the REMOTE 2 terminal Cable specifications Control commands Indication of lamp monitor Temperature monitor Lamp monitor Cleaning and replacement of air filter Procedure of cleaning Turn off the main power and remove the power plug from the receptacle. Dismantle the air filter. Set the air filter. Replacing the lamp unit Precautions on lamp unit replacement WARNING! When replacing the lamp, allow it to cool for at least one hour before handling it. Make sure that two lamp units are always installed. Lamp unit replacement steps Caution Ceiling Mount Bracket Safeguards Before asking for service Specifications PT-D4000E Compatible Signal List Note Dimensions Installation dimensions diagram Note: Trademark Acknowledgement Matsushita Electric Industrial Co., Ltd Information on Disposal for Users of Waste Electrical & Electronic Equipment (private households) For business users in the European Union Information on Disposal in other Countries outside the European Union