Basic menu operations
Press the MENU button.
The MAIN MENU appears on the screen.
MAIN MENU
PICTURE
POSITION
ADVANCED MENU
DISPLAY LANGUAGE
OPTION1
OPTION2
TEST PATTERN
NETWORK
SECURITY
MENU SELECT
SUB MENU
Select (highlight) the desired item with
the 
or 
button.
Selected items are displayed in yellow.
MAIN MENU
PICTURE
POSITION
ADVANCED MENU
DISPLAY LANGUAGE
OPTION1
OPTION2
TEST PATTERN
NETWORK
SECURITY
MENU SELECT
SUB MENU
Press the ENTER button to enter your selection.
The submenu for the selected option will now open. (e.g. : POSITION Menu)
POSITION
SHIFT
ASPECT | 4:3 |
ZOOM |
|
CLOCK PHASE | +16 |
KEYSTONE |
|
MENU SELECT
SUB MENU
Highlight the desired adjustment item
with the 
or 
buttons, then change the parameter value with the 
or 
buttons.
(Example of separate adjustment screen)
CLOCK PHASE | +16 |
•If no button is operated for approx. 5 seconds while a bar graph is displayed, the screen will return to the previous page.
Returning to the previous page
•Pressing the MENU button returns the screen to the previous menu page.
•When the MAIN MENU is on the screen, pressing the MENU button clears all menus from the screen.
Menu items shown in black characters
•Some menu items may not be valid for certain signal formats applied to the projector.
The menu items that cannot be adjusted or used are shown in black characters, and they cannot be selected.
Menu items setting
•The bottom prompt line differs on each menu
depending on the selected menu option:
• A prompt “ 
CHANGE” appears when changing the setting.
• A prompt “ 
ADJUST ” appears for a separate bar graph.
Resetting to the factory default
DEFAULT button is used to reset all of the projector adjustment values to the default levels which were set at the time of shipment from the factory.
PICTURE |
|
|
| |
|
|
|
| |
| PICTURE MODE | STANDARD |
|
|
| CONTRAST | 0 |
|
|
| BRIGHTNESS | 0 |
|
|
| COLOR | 0 |
|
|
| TINT | 0 |
|
|
| COLOR TEMP | DEFAULT |
| |
| WHITE GAIN | +6 |
|
|
| SYSTEM DAYLIGHT VIEW | OFF |
| |
SHARPNESS | +6 |
NOISE REDUCTION | 1 |
AI | ON |
SYSTEM SELECTOR | AUTO |
MENU SELECT
ADJUST
26
