Belkin 2 Series +++

With daisy-chain switch configuration, you can switch between BANKs by

pressing “Scroll Lock”, “Scroll Lock”, “Page Up”, to switch to the next

BANK. Press “Scroll Lock”, “Scroll Lock”, “Page Down”, to switch to the

previous BANK.

You can switch directly to any port on any BANK by pressing “Scroll

Lock”, “Scroll Lock”, BANK Address, and port number. For example, if

you press “Scroll Lock”, “Scroll Lock”, “03”, “05”, the computer on BANK

03, port 5 will become active.

Switch to BANK 03, Port 5—(03, 05)

USING YOUR MATRIX2

Pressing “Scroll Lock”, “Scroll Lock”, “A” will activate the AutoScan

function for that Console. In AutoScan mode, the MATRIX2 remains on

one port for a preset number of seconds, before switching to the next

computer. This time interval can be set through the On-Screen Display

menu. AutoScan is Console-independent.

Press any button on the front panel or any key on the keyboard to

disable AutoScan.

Note: There is no mouse or keyboard control in AutoScan mode. This is

necessary to prevent data and synchronization errors. If the user

is using the mouse or keyboard when the MATRIX2 is switching

between ports, data flow may become interrupted and could

result in erratic mouse movement and/or incorrect character input

from the keyboard.

You can select a connected computer by pressing the direct-access port

selector, located on the front panel of the MATRIX2. The LED will be lit

above the number to indicate which port is currently active. For example,

to select port 3, press the “PORT 03” button. The LED should light up

above the button to indicate that port 3 is active.

USING YOUR MATRIX2

Switch to previous BANK—Page Up

Switch to next BANK—Page Down

+++

P73783_Omniview_matix2_man.qxd 3/5/02 5:00 PM Page 20