38
USING YOUR ROUTER
38
Updating the Router’s Firmware
via the Web Interface
The following steps show you how to update your Router’s
firmware using its web inter face. You do not need to be connecte d
to the Internet as this interf ace is built into the Route r itself.
Setup steps:
1. Locate and download the firmwa re file from the Belkin
support site. (Type your part nu mber into the search box in
the top right corner and look f or “Firmware” in the tit le.)
2. Save the file to a location on your computer where
you can get to it easily, such as your des ktop.
3. Connect the computer to one of th e four LAN
ports on the Router (refer to imag e).
4. Open a web browser on the computer.
5. In the address bar of the web browser, type “ http://router” or
“http://192.168.2.1” and press “Enter” on your keyb oard.