Using Tone-Out, Fire Tone-Out Introduction | Uniden UBC3500XLT

Using Tone-Out

Fire Tone-Out Introduction

Your scanner can be set to respond to fire tone-outs that use standard two-tone sequential paging, short one-tone paging, and long group tone paging. You can save up to 10 settings. When you select a setting in standby mode, the scanner also monitors for any other setting that uses the same transmit frequency, modulation, and attentuation settings.

You need tone-out setup information from the agency you wish to monitor.Check with your local agency or on-line resources.

Setting Tone-Out Standby

Menu

Tone-Out for...

Tone-Out Standby

Turn the scroll control to select the tone-out to monitor. All tone-outs that have the same frequency, modulation, and attenuation setting as the one you select, are also monitored.

In standby mode, the display cycles through all monitored tone-out settings.Regardless of the current display, the scanner always alerts on any received tone-out that matches a stored setting.

If you press HOLD while in standby mode, the scanner temporarily exits the mode and you hear all transmissions on that frequency. No alerts sound, even if a tone-out matches one you have stored. Press HOLD again to return to standby mode.

Setting Up Tone-Out

Menu

Tone-Out for ...

Tone-Out Setup

Scroll to select the tone-out (1 - 10) you want to program, then press EYES. Then you can scroll to any of the following settings and press EYES to select and modify the selected settings:

76

Image 76

Uniden UBC3500XLT owner manual Using Tone-Out, Fire Tone-Out Introduction, Setting Tone-Out Standby, Setting Up Tone-Out

Contents

UBC3500XLT OWNER’S Manual Precautions Earphone Warning Contents Entering/Editing Conventional Channel Groups Contents Introduction Frequency MHz Modulation Step kHz Lower Edge Upper Edge Introduction Frequency MHz Modulation Step kHz Lower Edge Feature Highlights General Feature Highlights Search Priority About This Manual Using the Multifunction Scroll ControlEntering Text Menu Program System How the Scanner’s Controls Are Represented in This ManualEdit Name Page What is Scanning? What is Searching?Understanding Scanning Understanding the Scanner’s Memory What is CTCSS/DCS? 023 025 026 031 032 036 043 047 Conventional Scanning Simplex Operation Repeater Operation Where To Get More InformationInformation On The Internet Included With Your Scanner Using Internal Batteries Setting Up Your ScannerSetting Up Your Scanner Using Rechargeable Batteries Using AC Power Removing the Display Sticker Connecting the Antenna Connecting an Earphone/HeadphoneConnecting an Extension Speaker Connecting an Optional Antenna Attaching the Wrist Strap Attaching the Belt ClipLook At The Keypad Hold Pri Look At The Display No/rev Func Using Menu Using Func Turning On the Scanner and Setting the Squelch Once. Volume Level and aBasic Operation Basic Operation Scanning Systems Selecting Systems to Scan Selecting System Channel Groups Locking/Unlocking Systems Locking/Unlocking Channels Temporarily Holding On a SystemHolding On a Channel Quick-Storing Channels Quickly Recalling Channels Toggling Channel Alpha Tags Using the Menu Menu Item Submenu Using the Menu Settings Adjusting the Key BeepDisplaying System Information Locking/Unlocking the Keypad and Scroll Turning Power Save On or Off Using the BacklightSettings Priority Scan Setting the Audio AGC Adjusting the Display ContrastConnecting Your Scanner to a Personal Computer Initializing the Scanner’s Memory Using the Cloning Options Settings PC Control Wired Cloning Wired CloneMaster scanner Clone Master Press Scan Key Slave scanner Clone Slave Press Scan Key Programming Radio Systems Programming Conventional SystemsProgramming Radio Systems Program System New System Program System Entering/Editing Conventional Channel GroupsEdit Group New Group Edit Group Entering/Editing Conventional ChannelsEdit Channel New Channel System-Level Settings Editing the System NameEditing the System Quick Key Edit Sys Option Set Quick Key Setting System Lockout Setting the System Hold TimeProgramming/Editing Optional Settings Edit Sys Option Set Lockout Setting the Channel Delay Time Setting the Data SkipEdit Sys Option Set Delay Time Edit Sys Option Set Data Skip Group-Level Settings Deleting SystemsCopying Systems Entering/Editing the Group Name Setting the Group Quick Key Channel-Level Settings Setting Group LockoutDeleting Groups Editing the Channel Name Edit Channel Editing FrequenciesInput Frequency Setting Channel Alert Setting Channel PrioritySet Alert Set Level Setting CTCSS/DCSSet CTCSS/DCS Setting the Channel Frequency Modulation Set Moduration Setting Channel Lockout Setting Channel AttenuationSet Attenuator Deleting Channels Copying/Pasting ChannelsDelete Channel Copy Channel Edit Channel Paste Channel Service Search Searching and StoringChanging the step of Air Band Quick Search Custom Search Search for Custom Search Editing a Custom Search Range Search for Edit Custom Editing a Service Search Search for Edit Service Auto Search and Store Selecting a System Search for Search and Store Using the Close Call Feature Using the Close Call Feature Setting Close Call Options Close Call Select Mode Select Beep 10/15/30/45/60 sec Close Call Hits Search and Close Call Options Managing Locked-Out FrequenciesUnlocking All Frequencies Reviewing Locked Out Frequencies Screening Out Broadcast Sources Searching for Subaudible TonesSearch and Close Call Options Setting the Maximum Auto Store Value Setting the Modulation TypeSrch/CloCall Opt Max Auto Store Srch/CloCall Opt Set Modulation Setting Attenuation Setting Data SkipSrch/CloCall Opt Set Attenuator Srch/CloCall Opt Set Data Skip Setting the Delay Time Setting the Search Frequency StepSrch/CloCall Opt Set Delay Time Srch/CloCall Opt Set Step Setting Air Band Step Using Tone-Out Setting Tone-Out StandbySetting Up Tone-Out Fire Tone-Out Introduction Using Tone-Out Page Care and Maintenance CleaningGeneral Use Location Birdies Troubleshooting Troubleshooting Error Memory Specifications SpecificationsPage Optional Accessories Initial Setting of the Menus Appendix Appendix UHF Collecting Information PlanningPlanning System Name and Quick Key Group Name and Quick Key Frequency-Alpha Tag-Priority Conventional System Worksheet Conventional System Worksheet Declaration of Conformity Declaration of Conformiry Uniden Corporation All rights reserved UBZZ01347ZZ0