Notes:
•If you select 0, the scanner stays on the system for a minimal time (only long enough to check current system activity).
•The default setting is 2 seconds for each system.
•For conventional systems, all unlocked channels will be scanned at least once regardless of this setting.
•The scanner moves to the next system after the hold time expires, any current transmission ends, and the channel delay time expires.
Setting the Channel Delay Time
Menu
Program System
Select the system
Edit Sys Option
Set Delay Time
This setting controls how many seconds the scanner waits after a transmission ends before resuming scanning. Enter a value from
Notes:
•The default setting is 2 seconds for each system.
•This setting applies to all channels within the system.
Setting the Data Skip
Menu
Program System
Select the system
Edit Sys Option
Set Data Skip
This setting controls how the scanner behaves when it stops on a channel that has a data signal.
48
