which data is transferred between the scanner and the computer, in bits per second (bps).
Important! Before you start transferring data between your scanner and your computer, make sure the batteries are fresh or fully charged. If the scanner loses power while you are transferring data, its memory might be corrupted and all information programmed in the
scanner might be erased.
Hint: If you have trouble transferring
data between your scanner and your computer, try setting the baud rate to a slower setting.
Use the optional connection cable to connect your scanner to another UBC3500XLT scanner or your personal computer. Optional software is available at http://www.racescanner.eu.
Menu
Settings
PC Control
PC Control Lets you set the baud rate your scanner uses to communicate with a personal computer.
•Off The baud rate is not set.
•9600 bps The baud rate is set to 9600 bps.
• 19200 bps The baud rate is set to 19,200 bps.
•38400 bps The baud rate is set to 38,400 bps.
•57600 bps The baud rate is set to 57,600 bps.
•115200 bps The baud rate is set to 115,200 bps.
Using the Cloning Options
Lets you set your scanner as a master (source) or slave (recipient), letting you transfer programming to or from another UBC3500XLT scanner. See “Wired Cloning” on Page 42.
Settings
41
