Refer to the appropriate section to set
•See “Editing the System Name” on Page 46
•See “Editing the System Quick Key” on Page 46
•See “Setting System Lockout” on Page 47
•See “Setting the System Hold Time” on Page 47
•See “Setting the Channel Delay Time” on Page 48
•See “Setting the Data Skip” on Page 48
•See “Deleting Systems” on Page 49
•See “Copying Systems” on Page 49
•See “Entering/Editing Conventional Channel Groups” on Page 44
Entering/Editing Conventional Channel Groups
To enter channels in a conventional system, first set up a channel group (or groups) to hold the channels. Then, enter the channel and channel parameters in the group(s).
Setting Up a Channel Group
Menu
Program System
Select the system
Edit Group
New Group
The scanner creates a group with a default name of Group n. n increments by one for each new group you create within a system. Refer to the appropriate section to set
•See “Entering/Editing the Group Name” on Page 49
•See “Setting the Group Quick Key” on Page 50
•See “Deleting Groups” on Page 51
•See “Setting Group Lockout” on Page 51
•See “Entering/Editing Conventional Channels” on Page 45
44
