CCDND (Do Not Disturb) - The scanner checks for a Close Call hit every 2 seconds only if the scanner is not currently stopped on a transmis- sion. If the scanner is on a transmission the scanner waits until the signal ends to perform a Close Call check. This prevents breaks in audio during Close Call checks.
CCPRI - Close Call works even if there is a transmission. Checks for a Close Call hit every 2 seconds.
Off - Close Call is turned off for all mode.
Note:You can also toggle this setting by pressing Func then 
•Set CC Override: Lets you select how the Close Call feature works with other scanning activities.
On
Off - If the scanner detects a Close Call frequency, CC Found! and “E” to Listen appear for the period which you have set at Set CC Pause (See page 68). Press E to display the Close Call frequency during that period.
Turn the scroll control to display an option, then press the scroll control.
•Set CC Alert: Lets you select how the scanner alerts you when it receives a Close Call signal. You can select any of the following options.
Select Mode
•Beep (the scanner beeps when it receives a Close Call signal)
•Light (the backlight turns on when it receives a Close Call signal)
Using the Close Call Feature
67
