Uniden UBC3500XLT Attaching the Belt Clip, Attaching the Wrist Strap, Look At The Keypad

Models: UBC3500XLT

1 94
Download 94 pages 26.36 Kb
Page 25
Image 25

WARNING!

Never connect any part of the headphone jack to the antenna jack or connect the radio to an installation where the antenna and audio connection are grounded. This might damage the scanner.

Attaching the Belt Clip

To make your scanner easier to carry when you are on the go, use the supplied belt clip. Rotate the scanner upside down to remove it from the clip.

Attaching the Wrist Strap

To keep your scanner safely close at hand, use the supplied wrist strap. Push the small loop on one end of the wrist strap through the lug on the right side of the scanner, then thread the other end of the wrist strap back through the small loop to secure it.

A Look At The Keypad

car

Your scanner's keys have various functions labeled on the key tops and below the keys.

To select the function labeled on a key, simply press the key. To select the function labeled below a key, hold down Func on the left side of the scanner then press the key. appears on the display.

Setting Up Your Scanner

25

Page 25
Image 25
Uniden UBC3500XLT owner manual Attaching the Belt Clip, Attaching the Wrist Strap, Look At The Keypad