•Beep+Light (the scanner beeps and the backlight turns on when it receives a Close Call signal)
•None (the scanner does not alert)
Select Beep
•Off (the scanner does not beep)
•Alert
Set CC Pause: Lets you select how long the scanner waits after a hit before it returns to the previous operation.
•3/5/10/15/30/45/60 sec.
•Infinite.
Turn the scroll control to display an option, then press the scroll control to select it.
•Set CC Bands: Lets you select the Close Call band settings. You can turn the following bands on or off.
VHF Low1 (25.0000 - 53.9875 MHz) Band Plan1 (25.0000 - 53.9950 MHz) Band Plan2
(25.0000 - 53.9937 MHz) Band Plan3 VHF Low2 (54.0000 - 107.9500 MHz)
Air Band (108.0000 - 136.9875 MHz) Air 12.5k (108.0000 - 136.9916 MHz) Air 8.33k
VHF High1 (137.0000 - 224.9950 MHz) VHF High2 (225.0000 - 319.9500 MHz)
UHF (320.0000 - 512.0000 MHz) 800MHz+ (806.0000 - 1300.0000 MHz)
Use the scroll control to select a band, press the scroll control, then use the scroll control to select On or Off and press the scroll control. Turning off undesired bands speeds up Close
68