Menu
Search for ...
Search and Store
Select the system where you want to store the frequencies
Select the range from Custom Search or Air Notes:
•If no system is programmed, No System Stored appears.
•Over Limit appears when you select the system which has already stored 20 channel groups, or when the total channels has been already 2500.
•If all the frequencies of the selected search range is locked out, All Locked! appears.
When you select a search range, the scanner looks for active frequencies within that range and SEARCH AND STORE appears on the display’s lower line and the system name and search range name appear on the display’s upper line. When the scanner finds an active transmission, it checks to see if the frequency has already been stored in the system. If the frequency has already been stored, the scanner continues to search. If the frequency has not been stored, it stores the frequency into a group named Found Channels, then resumes searching. The scanner creates this group if it doesn’t already exist.
64
