Nikon S3000 user manual Electronic VR for Movies, Button M z Setup menu a 126 M w Electronic VR

Setup Menu

Basic Camera Setup

w Electronic VR

d button M z (Setup menu) (A 126) M w Electronic VR

Choose whether or not electronic VR (vibration reduction) is used when taking still pictures.

wAuto

Electronic VR is enabled and the effects of camera shake are reduced with shooting of still pictures when all of the following conditions are met.

•The flash is turned off or set to slow sync mode.

•A slow shutter speed is used.

•The Continuous setting is set to Single

•The subject is dark.

Off (default setting)

Electronic VR is disabled.

When Auto is selected, Ris displayed in the monitor (A 6), and electronic VR is

applied according to shooting conditions.

BNotes on Electronic Vibration Reduction

•Electronic VR does not function when the flash is used, except when slow sync mode is applied. Electronic VR does not function when slow sync with red-eye reduction (A 54, 55) is used.

•Electronic VR does not function with exposures that exceed a certain length of time.

•Electronic VR is activated only when ISO sensitivity (A 42) is set to Auto.

•Electronic VR does not function when Blink proof (A 64) is set to On in smart portrait mode.

•Electronic VR does not function in the following scene mode:

-Sports (A 54)

-Night portrait (A 54)

-Dusk/dawn (A 55)

-Night landscape (A 56)

-Museum (A 57)

-Fireworks show (A 58)

-Backlight (A 58)

•The effectiveness of electronic VR decreases as camera shake increases.

•The picture taken using electronic VR may be somewhat “grainy” in appearance.

DElectronic VR for Movies

To compensate for camera shake with movie recording, enable Electronic VR (A 109) from the

134movie menu (A 108).