Nikon COOLPIXS3000P Connecting the Camera to a Printer, Turn off the camera Turn on the printer

Connecting to a Printer

Connecting to Televisions, Computers and Printers

Connecting the Camera to a Printer

1Turn off the camera.

2Turn on the printer.

Check printer settings.

3Connect the camera to the printer using the supplied USB cable.

4The camera is automatically turned on.

When properly connected, the PictBridge startup screen (1) will be displayed in the camera monitor, followed by the Print selection screen (2).

1	2	Print selection
		1 5/05
		20 1 0
		N O .	4
		4

BConnecting the USB Cable

When connecting the USB cable, be sure that the connectors are properly oriented. Do not use force when connecting the USB cable. When disconnecting the USB cable, do not pull the connector at an angle.

BIf the PictBridge Screen is not Displayed

Turn off the camera and disconnect the USB cable. Set Charge by computer (A 140) in the

120camera’s setup menu to Off, then connect the camera again.