Belkin belkin bulldog plus- shutdown management software for windows Network, Set Password

Network

Set Password

Sets the Bulldog Service password.

Choose Master/Slave

Please refer to the BULLDOG Service operation mode. If the computer connects to UPS directly (with RS-232 or USB) and can send commands to its connected UPS then the BULLDOG Service acts as a "Master". If it connects to UPS directly (with RS-232 or USB) but only listens to UPS then it is a "Serial Slave". If the computer is powered by the UPS, but obtains the UPS information from Master via TCP/IP network then it is a "Networking Slave". When BULLDOG Service is a Networking Slave you must assign the Master IP address so that the Networking Slave can connect to the Master and obtain the UPS information.

a.Master: Configures the BULLDOG Service to be a Master.

b.Serial Slave: Configures the BULLDOG Service to be a Serial Slave.

c.Networking Slave: Configures the BULLDOG Service to be a Networking Slave.

d.Master IP Address: When BULLDOG Service is a Networking Slave you must assign the Master IP address so that the Slave can connect to the Master host and obtain the UPS information.

Belkin Components 30