Turn Receptacle Relay On
Turns the selected receptacle relay on. Each Receptacle Relay may control more than one outlet, please see the rear panel of your UPS or the UPS hardware user's manual.
a. Select a Receptacle Relay: Selects a receptacle relay.
b. Delay: Set the delay time to turn on the receptacle relay.
c. On: Executes the stated command.
Turn Receptacle Relay Off
Turns the receptacle relay off. Each Receptacle Relay may control more than one outlet, please see the rear panel of your UPS or the UPS hardware user's manual.
a. Select a Receptacle Relay: Selects a receptacle relay.
b. Delay: Set the delay time to turn off the outlet group.
c. Off: Executes the turn off command.
UPS Audible Alarm On
Enables the UPS buzzer. On the Bottom Layer Buttons press the Status button to get the UPS buzzer status.
UPS Audible Alarm Off
Mutes UPS buzzer alarm.
10 Seconds Test
UPS switches to backup mode and the output power is supplied by the battery for 10 seconds.
Deep Battery Test
UPS switches to backup mode and output power is supplied by the battery until the battery is low.
Cancel Test
This menu allows you to stop the test immediately.
Belkin Components | 36 |
