USB INSTALLATION
USB Installation:
Keyboard, Monitor, and Mouse Connections
Available on F1DS102T and F1DS104T models only
Note: On some computers, you must enable USB support on your system BIOS. Please reference your computer manufacturer's manual or motherboard manual to verify that USB support is enabled.
CONSOLE:
1.Connect the monitor to the SOHO Series KVM Switch. Using the cable that is included with your monitor, connect it to the HDDB15 female port on the top of the SOHO Series KVM Switch with the monitor symbol on the CONSOLE. See fig. 10.
USB INSTALLATION
2.Connect a PS/2 keyboard to the PURPLE port on the CONSOLE. See fig. 11.
fig. 11
3. Connect a
4. Power on your computer as you would normally and wait until your operating system completes loading.
fig. 10
16 | 17 |
