USB INSTALLATION

COMPUTER:

5.Using a standard USB A-to-B cable (we recommend Belkin Part# F3U134-XX or F3U134-XX-GLD), insert the end with the B-type connector to the SOHO Series KVM Switch. Insert the other end of the cable with the A-type connector to an available port on your USB computer or USB hub that is attached to your computer. See fig. 12.

6.Your computer should recognize your KVM Switch and will automatically install the HID USB driver if not already installed on your computer.

fig. 12

USB INSTALLATION

Audio and Microphone Connections are not required to use with your KVM Switch.

(Recommend to use Belkin PRO Series Audio Cables Part# F8V209-XX)

CONSOLE:

7.Using the audio cable attached to your speakers, connect the male 3.5mm plug to the SPEAKER IN on the CONSOLE of your SOHO Series KVM Switch. See fig. 13.

fig. 13

8.Using the mic cable attached to your microphone, connect the male 3.5mm plug to the MIC IN on the CONSOLE of your SOHO Series KVM Switch. See fig. 13.

18

19

Page 11
Image 11
Belkin F1DS104P, F1D5102P, F1DS104T, F1DS102T user manual USB Installation