P74042_F1DE108E_man.qxd 5/6/02 10:06 AM Page 18

INSTALLATION

Connecting the Computers

8.Power on the KVM Switches in whatever order is convenient. You should see them light up and display the digits “XX”, where XX denotes their respective BANK addresses.

Note: If the KVM Switches still do not enumerate correctly, check that all Switches have the correct BANK address assigned to them and that all daisy-chain cables are connected properly.

Enabling Daisy-Chain Mode on BANK 00

9.Primary BANK 00 must be configured to daisy-chain mode by the administrator. This is only to be set on BANK 00.

a.Open IntelliView and enter “Setup”. Refer to the section “IntelliView On-Screen Display Menu Control” in this manual for instruction on operating IntelliView.

b.Navigate to the “Options” page, and check the “Daisy-chain this KVM” box.

c.A dialog box will appear that says “You must power cycle the KVM for this to take effect”. Click “OK” to clear the dialog box and power cycle the KVM Switch.

When the KVM Switch reboots, it will interact with the remainder the other daisy-chained KVM Switches as expected. You can verify this by opening IntelliView and scrolling through the list of computers. If any of the other daisy-chained computers appear in BANK 00’s list, then it is working properly.

Note: If you don’t configure BANK 00 for use on the daisy-chain, then it will not be able to interact with any of the other KVM Switches and they will not be able to interact with it. In addition, the unit’s front panel will not act the same as the other units’ front panels. Finally, there could be some unpredictable interactions caused by connecting an improperly configured BANK 00 to a daisy-chain.

USING YOUR KVM SWITCH

POWERING UP THE SYSTEMS

Once all cables have been connected, power up the connected computers. All computers can be powered on simultaneously. The KVM Switch emulates both a mouse and keyboard on each port and allows your computer to boot normally.

The computer connected to port “01” of the Primary Switch will be displayed on the monitor. Check to see that the KVM Switch is working normally by use of mouse, keyboard, hot keys, IntelliView, and/or direct-access port selectors. Proceed to do this with all occupied ports to verify that all computers are connected and responding correctly. If you encounter an error, check your cable connections for that computer and reboot, if necessary.

If the problem persists, call Belkin Tech Support at 1-800-223-5546 ext. 2263.

Now that you have connected your Console and computers to your KVM Switch, it is ready for use.

You can select connected computers by the direct-access port selectors, located on the front panel of the KVM Switch, hot key commands, or IntelliView. It takes approximately 1–2 seconds for the video signal to refresh (depending on monitor and graphics card used) after switching computers.

Note: For hot keys (e.g. up and down arrows) and AutoScan, the order of progression, when switching from one computer to the next, is dictated by the order of the computers in the list box (on the main page of IntelliView).

Selecting a Computer Using Direct-Access Port Selectors

Standalone Configuration

Note the following:

The 7-segment LED display will indicate the number of the port in focus

One port-selection LED display will always be lit, corresponding to the port in focus

18

19

Page 11
Image 11
Belkin F1DE108B manual Installation, Using Your KVM Switch, Powering UP the Systems

F1DE108B specifications

The Belkin F1DE108B is a versatile KVM (Keyboard, Video, Mouse) switch designed to streamline the management of multiple computers without cluttering your workspace. With the growing reliance on multiple systems in both office and home environments, this device serves as an essential tool, enabling users to control up to eight computers from a single console, thus enhancing productivity and efficiency.

One of the key features of the Belkin F1DE108B is its ability to support various operating systems and platform compatibility. Whether you're using Windows, Linux, or Mac OS X, this KVM switch provides seamless connectivity, ensuring that users can switch between machines effortlessly. The device supports video resolutions up to 2048 x 1536, ensuring crisp and clear display quality for applications that require high visual fidelity.

In terms of connectivity, the Belkin F1DE108B offers USB 2.0 ports, allowing users to connect peripherals such as printers, scanners, and external storage devices. This feature is particularly advantageous for users who regularly switch between computers and require consistent access to essential devices without the hassle of constant reconfiguration.

Another notable characteristic is the inclusion of hotkey technology, which allows users to switch between computers using simple key combinations. This functionality saves time by eliminating the need to manually press physical buttons on the KVM switch. Additionally, the device features a built-in front-panel LED that visibly indicates which computer is currently active, providing users with a quick visual reference.

The design of the F1DE108B is compact and functional, making it easy to integrate into various setups without consuming excessive desk space. Its sturdy construction ensures durability, providing long-term reliability for users who depend on it day in and day out.

With plug-and-play simplicity, installation is straightforward, requiring minimal technical expertise, making the Belkin F1DE108B an ideal solution for home office users, IT professionals, and gamers alike. Overall, the Belkin F1DE108B offers an effective means of enhancing productivity and organization in a multi-computer environment, showcasing the essential technology that modern users need.