Belkin F1DE108B Dip Switch Configuration Chart, Installation, Connecting the Daisy-Chain Cable

P74042_F1DE108E_man.qxd 5/6/02 10:06 AM Page 16

			I N STA L L AT I O N
DIP SWITCH CONFIGURATION CHART
	DIP SWITCH#			BANK ADDRESS
DOWN	DOWN	DOWN	DOWN	BANK 00 PRIMARY / SECONDARY (Default)
UP	DOWN	DOWN	DOWN	BANK 01 PRIMARY / SECONDARY
DOWN	UP	DOWN	DOWN	BANK 02 PRIMARY / SECONDARY
UP	UP	DOWN	DOWN	BANK 03 PRIMARY / SECONDARY
DOWN	DOWN	UP	DOWN	BANK 04 SECONDARY
UP	DOWN	UP	DOWN	BANK 05 SECONDARY
DOWN	UP	UP	DOWN	BANK 06 SECONDARY
UP	UP	UP	DOWN	BANK 07 SECONDARY
DOWN	DOWN	DOWN	UP	BANK 08 SECONDARY
UP	DOWN	DOWN	UP	BANK 09 SECONDARY
DOWN	UP	DOWN	UP	BANK 10 SECONDARY
UP	UP	DOWN	UP	BANK 11 SECONDARY
DOWN	DOWN	UP	UP	BANK 12 SECONDARY
UP	DOWN	UP	UP	BANK 13 SECONDARY
DOWN	UP	UP	UP	BANK 14 SECONDARY
UP	UP	UP	UP	BANK 15 SECONDARY

Example: Four KVM Switches (F1DE108B) are daisy-chained together to control 32 computers. The DIP Switch on the Primary Switch is set to “BANK address 00” and the Secondary Switches are each set to a unique BANK (between 01 and 15).

Installation

Before you begin:

1.Make sure that all computers and KVM Switches are powered off and that each KVM Switch has been assigned a unique BANK address.

2.Place all Primary and Secondary Switches in the desired location.

3.Connect the servers to the KVM Switch as previously described for a standalone configuration.

4.Connect the Console monitor, keyboard, and mouse to the Console ports of the Primary KVM Switch(es), as previously described for standalone configuration, skipping steps 5 and 6.

I N STA L L AT I O N

Example of Daisy-Chain Configuration:

				console
bank			flash	USB
select				daisy chain IN	CPU 01/02	CPU 03/04	CPU 05/06	CPU 07/08
1	2 3	4		PS/2
reset				daisy chain OUT				90-264 VAC. 47-63 Hz
				console
bank			flash	USB
select				daisy chain IN	CPU 01/02	CPU 03/04	CPU 05/06	CPU 07/08
1	2 3	4		PS/2
reset				daisy chain OUT				90-264 VAC. 47-63 Hz
				console
bank			flash	USB
select				daisy chain IN	CPU 01/02	CPU 03/04	CPU 05/06	CPU 07/08
1	2 3	4		PS/2
reset				daisy chain OUT				90-264 VAC. 47-63 Hz
				console
bank			flash	USB
select				daisy chain IN	CPU 01/02	CPU 03/04	CPU 05/06	CPU 07/08
1	2 3	4		PS/2
reset				daisy chain OUT				90-264 VAC. 47-63 Hz

Connecting the Daisy-Chain Cable

5.Using the Daisy-Chain Cable (F1D9402-XX), connect one end to the “Daisy-Chain OUT” port on the first KVM Switch.

6.Connect the other end of the Daisy-Chain Cable to the “Daisy-Chain In” port of the second KVM Switch.

Note: It does not matter which unit is the Primary Switch, only that the cables are always connected “OUT to IN” or “IN to OUT”.

Adding Additional Units

7.Continuing in the same manner, using the Daisy-Chain Cable (F1D9402-XX), connect “Daisy-Chain IN” to “Daisy-Chain OUT” on all subsequent units.

*** Cautions and Warnings ***

Never connect “Daisy-Chain IN” to “Daisy-Chain IN” or “Daisy-Chain OUT” to “Daisy-Chain OUT”. This may produce unpredictable results and may cause damage to the KVM Switch.

16 17