OmniView® Secure KVM Switch
1.3Usage Assumptions
The Common Criteria Evaluated Configuration requires the following assumptions in usage of the OmniView Secure DVI
A. ACCESS | An AUTHORIZED USER possesses the necessary privileges to access the information |
| transferred by the TOE. |
| USERS are AUTHORIZED USERS. |
A. EMISSION | The TOE meets the appropriate national requirements (in the country where used) for |
| conducted/radiated electromagnetic emissions. [In the United States, Part 15 of the FCC Rules |
| for Class B digital devices.] |
A. ISOLATE | Only the selected COMPUTER’S video channel will be visible on the shared MONITOR. |
A. MANAGE | The TOE is installed and managed in accordance with the manufacturer’s directions. |
A. NOEVIL | The AUTHORIZED USER is |
A. PHYSICAL | The TOE is physically secure. |
A. SCENARIO | Vulnerabilities associated with attached DEVICES (SHARED PERIPHERALS or |
| SWITCHED COMPUTERS), or their CONNECTION to the TOE, are a concern of the |
| application scenario and not of the TOE. |
2.Common Criteria Administrative Guidance - OmniView® Secure DVI
The follow section lists the supplemental information relating to a Common Criteria deployment for the OmniView® Secure KVM Switch User Manual in accordance with AGD_OPE.1 Common Criteria Assurance Measure requirements.
2.1Usage Assumptions
Note that the usage assumptions listed in Section 1.4 must be maintained to assure all TOE security objectives are maintained during usage.
2.2Applicability of the OmniView® Secure DVI
The OmniView Secure KVM Switch User Manual applies in its entirety to the Common Criteria Evaluated Configuration.
Belkin OmniView® Secure DVI KVM Switch User Manual Common Criteria Supplement
© 2008 Belkin International, Inc. All rights reserved. All trade names are registered trademarks of respective manufacturers listed.
