Belkin F1DP101M user manual Network Configuration, Device Name, Three TCP Ports

Remote Installation

Step 3 Network Configuration

When first connecting to the IP Device’s HTTPS configuration page, two browser security warnings may appear. Click “Yes” on both warnings.

Note: The first security warning only occurs once per client machine. This is when the Belkin root certificate is installed. The second warning can be avoided

by adding a line to your Windows “hosts” file (typically at \winnt\system32\

drivers\etc\hosts—edit using Notepad). The line format should be “IP address-any-name.kvm.net”.

(For example: 192.168.2.155 BelkinSMB.kvm.net.)

Device Name

Type in a name you would like to assign the IP Device. The default device name consists of the letter “D” followed by the 7-digit device number located on the back of the IP Device.

Three TCP Ports

Choose three Transmission Control Protocol (TCP) ports, and type in the provided fields. The default ports are 900, 901, and 902. This is suitable for the majority of installations. However, you can enter any value for TCP ports, from 800 up to 65535. This applies to all three fields.

Note: Your firewall or router security access list must enable inbound communication through the selected TCP ports for the IP Device’s address. Ports 80 and 443 are used for standard Web communication and should be open. For client-computer access from a secured LAN, the selected ports should be open for outbound communication.

1

2

3

4

5

6

7

8

9

section

18