Belkin F1DP101M user manual Restore Factory Settings, To restore factory settings, Logging Out

Remote Installation

Restore Factory Settings

You can restore the IP Device to its original factory settings. This restores the original parameters, resetting all the information added by the administrators, including: network settings, servers, switches, users, and passwords. You also have the option to preserve network settings, as explained below.

WARNING! Once data has been reset, it cannot be retrieved.

To restore factory settings:

1.Select “Restore Factory Settings” in the far-left menu. The Restore-Factory-Settings page will appear (see Fig. 9).

2.Check the Preserve-Network-Settings box if you would like to preserve the network settings.

3.Click .

Fig. 9 Restore-Factory-Settings Page

Logging Out

To exit the Configuration page and close the session, click .

Only one administrator can log into the Configuration area at a time. An idle timeout of 30 minutes terminates the session.

29