Belkin F1DP101M To specify and name servers, Installing new Switch-Definition Files SDFs

Remote Installation

To specify and name servers:

1. Click next to the “Manufacturer” and “Model” fields field and select the KVM-switch configuration that best suits your configuration.

2.Click . The number of possible connected servers will appear in the Server Name section.

3.Change the name of each connected server by highlighting the server and typing in a new name.

4.Click . to save the changes.

Note: You will need to change the name of every server you want to access. Server names left as “UNUSED” cannot be accessed.

Installing new Switch-Definition Files (SDFs)

If your KVM switch-configuration type is not listed in the drop-down list, contact Belkin Technical Support at (800) 282-2355 to request an updated SDF with the desired KVM-configuration list.

To install the SDF:

1.Load the file onto the client computer.

2.Click to locate the new SDF.

3.Click “Install” to update the Switch with the new file.

Note: If you change the hot-key sequence in the KVM Switch to “Print Screen”, “Ctrl”, or “F12”, you must load a new switch-definition file (SDF) for the corresponding hot key. The SDF can be downloaded from www.belkin.com/support.

1

2

3

4

5

6

7

8

9

section

24