Belkin F5D7330 manual Logging into the Adapter, Logging out of the Adapter, section

Using the Web-Based Advanced User Interface

Logging into the Adapter

Using your Internet browser, you can access the Adapter’s Web-Based Advanced User Interface. In your browser, type “192.168.2.225”

(do not type in anything else such as “http://” or “www”). Then, press the “Enter” key.

You will see the Adapter’s home page in your browser window. The home page is visible to any user who wants to see it. To make any changes to the Adapter’s settings, you have to log in. Clicking the “Login” button or clicking on any one of the links on the home page will take you to the login screen. The Adapter ships with no password entered. In the login screen, leave the password blank and click the “Submit” button to log in.

Note: An IP address conflict can occur if you use a CAT5 cable to try to manage the Adapter while it already has a wireless connection to the same router. To resolve this issue you need to disconnect one of the connections to the Adapter (wired or wireless).

Logging out of the Adapter

One computer at a time can log into the Adapter in order to make changes to its settings. There are two ways to log out: 1, by clicking the “Logout” button; and 2, automatically, by allowing a preset time-out period to elapse. The default time-out is 10 minutes; however, you can set the login period from 1 to 99 minutes.

1

2

3

4

5

6

7

section

15