Belkin F5D7330 Using the Web-Based Advanced User Interface, section, Subnet Mask, Site Survey

Using the Web-Based Advanced User Interface

Examples of a non-routable IP are:

192.168.x.x (where x is anything between 0 and 255) 10.x.x.x (where x is anything between 0 and 255)

(4)Subnet Mask

There is no need to change the subnet mask. This is a unique, advanced feature of your Belkin Router. It is possible to change the subnet mask if necessary; however, DO NOT make changes to the subnet mask unless you have a specific reason to do so. The default setting is “255.255.255.0”.

(5)Gateway IP Address

This is the IP address of the network router to which the Adapter is connecting.

(6)SSID (Wireless Network Name)

This is the name of the network to which the Adapter is connected. You can choose to enter a network manually by typing the name here, or use the Site Survey to automatically identify the wireless networks within range of the Adapter to which to connect.

(7)Site Survey

The “Site Survey” page will allow you to see a list of available wireless networks in your area. Under the “Select Network” column, you will be able to select the wireless network to which you wish to connect. Once you have selected the desired wireless network, click on the “Connect” button.

(8)Security Mode

If the network to which you are connecting is secure, you will need to enter a security key. The Adapter supports 64-bit WEP, 128-bit WEP, WPA, and WPA2.

1

2

3

4

5

6

7

section

19