5. The On Screen Display (OSD)
5.3.3.1 PIP Mode
PIP Mode can be set to off, single, PAP.
When PIP mode is Off, only one source is displayed.
When PIP mode is Single, the source connected to input 1 is the master source and displayed according its set- tings, whereas the source connected to input 2 is the PIP source and displayed either in Small, Medium or Large size according the PIP Size selections.
The position of the PIP source is set using the Vertical and Horizontal adjustment.
PIP Size, Vertical and Horizontal are only enabled if PIP Mode is selected Single.
In case no source is connected to input 2,
Single will result in an empty window with blue borders,
PAP will result in displaying source1 at the left half of the monitor (right half remains black).
RCU |
| Push button (1: top most) |
|
|
|
• Use the up and down cursor keys to navigate to |
| • Press 5 and 6 to navigate to PIP Mode |
the PIP Mode |
|
|
|
|
|
|
|
|
• Use the left and right cursor keys to select one |
| • Use 3 and 4 to select one of the options Off, |
of the options Off, Single, PAP |
| Single, PAP |
The current selection is visualized by a white |
| The current selection is visualized by a white cap- |
caption. |
| tion. |
|
|
|
|
|
|
The selection is applied without any further action. |
|
|
|
|
|
Using the direct access key F2, the selected PIP mode can be toggled between On and Off. Using the direct access key F3, the PIP master and the PIP source can be toggled.
5.3.3.2 PIP Size
PIP size can be set to small, medium, and large.
RCU
•Use the up and down cursor keys to navigate to the PIP Size
•Use the left and right cursor keys to select one of the options Small, Medium, Large.
The current selection is visualized by a white caption.
The selection is applied without any further action.
Push button (1: top most)
•Press 5 and 6 to navigate to PIP Size
•Use 3 and 4 to select one of the options Small, Medium, Large. The current selection is visualized by a white caption.
