Barco R5976934 Use the up and down cursor keys to navigate to , Use the 5 and 6 to select Red, Green, Blue , Use 3 and 4 to increase/decrease the value in

5. The On Screen Display (OSD)
5-28__________________________________________________________Barco - LC series - R5976934 - user's manual - Revision 08 - April 2008
When User is selected, the values for red, green, blue can be individually be adjusted:
RCU Push button (1: top most)
• Use the up and down cursor keys to navigate to
the Color Temperature
• Press 5 and 6 to navigate to Color Temperature
• Use the left and right cursor keys to select User • Use the left and right cursor keys to select User
• Use the down and up cursor keys to select Red,
Green, Blue
• Use the 5 and 6 to select Red, Green, Blue
• Use the left and right cursor keys to in-
crease/decrease the value in steps of 1
The current value is indicated.
• Use 3 and 4 to increase/decrease the value in
steps of 1
The current value is indicated.
The selection is applied without any further action.
Manual modification of R, G, B requires some experie nce!
In case a VGA signal looks e.g. greenish, pressing the function key F4 (Whi te balance) will
probably correct this. Thus no sophisticated co lor adjustment will be required.