Barco R5976934 5.6.1 Set display address , 5.6.2 Baud rate

5. The On Screen Display (OSD)
5-36__________________________________________________________Barco - LC series - R5976934 - user's manual - Revision 08 - April 2008
To select a display parameter; proceed as follows:
RCU Push button (1: top most)
• Use the up and down cursor keys to navigate to
the desired parameter
• Press 5 and 6 to navigate to the desired parame-
ter
• Use the left and right cursor keys to activate
the desired value.
The current selection is visualized by a white
caption.
• Use 3 and 4 to activate the desired value
The current selection is visualized by a white cap-
tion.
The selection is applied without any further action.
5.6.1 Set display address
The value can be set in the range from 1 to 255.
If more than one monitor is installed, the monitors can independently be RS232 remote-controlled by means of
their display address.
Default monitor address is "1". Allowed addresses are in the range from 1 to 255.
"
1 " is the common address.
A monitor will listen to the commands explicitly sent to his specific address and to commands sent to the com-
mon address.
RCU Push button (1: top most)
• Use the up and down cursor keys to navigate to
the Set display address
• Press 5 and 6 to navigate to Set display address
• Use the left and right cursor keys to in-
crease/decrease the address in steps of 1
The current value is indicated.
• Use 3 and 4 to increase/decrease the address in
steps of 1
The current value is indicated.
The value is applied without any further action.
5.6.2 Baud rate
The value can be set to 115200, 38400, 19200, 9600.
RCU Push button (1: top most)
• Use the up and down cursor keys to navigate to
the Baud rates
• Press 5 and 6 to navigate to Baud rate
• Use the left and right cursor keys to i select one
of the options 115200, 38400, 19200, 9600.
The current selection is visualized by a white
caption
• Use 3 and 4 to select one of the options 115200,
38400, 19200, 9600.
The current selection is visualized by a white cap-
tion
The value is applied without any further action.