Using the Belkin Wireless Networking Utility
After successfully installing the Belkin Wireless Networking Utility (WNU), configurations for wireless connection and security are just a few easy clicks away.
Accessing the Belkin Wireless Networking Utility from the Windows System Tray
To access the WNU, simply place your mouse pointer and
If the icon is not present, click on “Start > Programs > Belkin > Belkin Wireless Utility”.
Using the Belkin Wireless Networking Utility
1
2
3
5 | section |
4 |
|
6
The WNU’s default screen is the “Current Status” tab. The “Current Status” tab displays the current Network Status and Available Networks.
Network Status
This window displays the connectivity status of the current network. It even displays connectivity between the computer and router, and router and Internet. In the event of a connectivity problem, this window can be used to determine the problem’s source (e.g. computer, router, or Internet/modem).
Available Networks
This window displays the available networks at the current location as well as their SSID, Signal Strength, Security Type, Channel, and Network Type.
Lost Wireless Connection
If the current wireless connection is lost, a window will pop up and the WNU will attempt to reconnect.
14 | 15 |
