![](/images/new-backgrounds/1106164/10616415x1.webp)
Installing and Setting up the Card
Step 2 | Insert |
|
|
Insert the Card into your Computer
2.1After the software installation is finished, the message “Please plug in your Notebook Card now” will appear. Insert your Card.
2.2The Found New Hardware Wizard will appear. (This may take
2.3Select “Install the software automatically” and click “Next” to install the hardware.
Installing and Setting up the Card
2.4The Wizard will now install your software.
2.5You might see a screen similar to this one. This DOES NOT mean there is a problem. Our software has been fully tested and is compatible with this operating system. Select “Continue Anyway” and follow the
2.6The installation is now complete. Click “Finish” to exit.
1
2
3
4
5
6
section
10 | 11 |