You replaced the Ethernet Adapter with a new Ethernet Adapter and it does not work.
The installation procedure produces the message: Hardware and software support for USB was not found.
The LED is off.
The LED is blinking.
Each Belkin USB Ethernet Adapter has a unique encoded Ethernet identifier. Unplugging the adapter from the Windows® machine, and plugging a different adapter into the same port, will cause a problem in the protocol software. The original device should first be completely uninstalled.
The program detected that your computer is not configured for proper USB support. There are four main conditions to check:
1.You do not have a USB connection on the motherboard. The solution is to upgrade your motherboard or add a USB controller card.
2.It is possible that you do have the proper OS, but there is no connection between the motherboard and the USB connectors on the bracket.
3.It is possible that you do have the proper OS, but the controller on the motherboard is malfunctioning.
There are two main possibilities:
1.The host computer might be in standby mode, and not supplying full power to its devices.
2.The Ethernet Adapter did not properly enumerate. Enumerate is a USB term meaning the system has identified and configured the device and given it a unique address.
The Ethernet port connection might be inoperable. Check the Ethernet connection. Replace the Ethernet cable.
You require additional information about adding or removing network drivers.
The system does not respond when connecting the Adapter (for example, the hourglass cursor remains on the screen).
Consult the appropriate Windows® 98 documentation, or contact your System Administrator.
Remove and reinstall the USB support component of the operating system.
9
