Driver Installation (continued)
5.The "Add New Hardware Wizard" will appear telling you "Windows has found the following hardware: USB Ethernet Adapter". Place a checkmark next to "Automatic search for a better driver (recommended)" and click "Next".
6.The system may prompt you to insert your Windows Me CD. Insert the CD and select "OK".
7.The "Add New Hardware Wizard" will indicate, "Belkin USB Ethernet Adapter" and "Windows has finished installing the hardware device". Click "Finish".
8.Windows will now prompt you to restart your computer. Click "Yes" to complete the installation.
Once your computer has restarted, the Belkin USB 10/100 Ethernet Adapter will be active and working. If you are connecting to a cable modem or xDSL modem, follow the directions that came with your modem or from your Internet provider.
If you are setting up a network, go to the section titled "Specifying TCP/IP Parameters" to configure your adapter.
Windows® 2000
1.Close any Windows applications that you may be running on your computer.
2.Insert the Belkin USB 10/100 Ethernet Adapter floppy disk into your floppy drive.
3.Connect the USB cable to your computer and connect the cable to the USB Ethernet Adapter.
1 0
