Belkin F5U122-PC Specifying TCP/IP Parameters continued, please, network, we, recommend the

P73631_F5U122-PC-man.qxd 4/26/01 10:14 AM Page 13

Specifying TCP/IP Parameters (continued)

To access and change the networking properties in Windows® M e

1.Select "My Computer" / "Control Panel". If you do not see the "Network" icon in the window, click "view all Control Panel options" (located on the right side of the window).

2.Select "Network" by double-clicking on the "Network" icon.

3.The Network Configuration window appears. In this window, the USB Ethernet Adapter icon should be visible.

4.To configure TCP/IP settings, select "TCP/IP -> Belkin USB Ethernet Adapter" and click "Properties". To specify an IP address select "Specify an IP address".

Note:	If you are connecting to an existing network,
please		see your system administrator for this
information.		If you are setting up a new
network, we		recommend the
following:
	Suggested IP Address = 194.168.0.X (where
"X" is		greater than 0 and less than
255).
	Suggested Subnet Mask = 255.255.255.0

5.Enter a valid IP Address and Subnet Mask and click "OK".

6.Select the "Identification" tab and verify/modify the computer name and workgroup, and click "OK".

1 3