Driver Installation
Depending on which operating system you use, the installation procedure will vary slightly. Please find the installation section for your particular operating system for the proper installation sequence.
Note: The drivers shipped with this product are contained on a floppy disk. If your PC is not equipped with a floppy disk drive, you may download the drivers from the Belkin website at: http://www.belkin.com.
Windows® 98/Windows® 98SE
1.Close any Windows applications that may be running on your computer.
2.Insert the Belkin USB 10/100 Ethernet Adapter floppy disk into your floppy drive.
3.Connect the USB cable to your computer and connect the cable to the USB Ethernet Adapter.
4.A window will appear telling you that Windows has detected new hardware. If this window does not appear, contact your PC vendor for assistance.
5.The "Add New Hardware Wizard" will appear on the screen telling you that it has found the "USB Ethernet Adapter". Click "Next".
6.In the Window that appears next, place a checkmark next to "Search for best driver for your device" and click "Next".
7.In the next window, place a checkmark next to "Floppy Disk" and uncheck all other selected locations and click
8
