4
EN
4
(1) POWER OFF THE COMPUTE R AND DISCO NNECT THE P OWER
CORD.
(2) Remove the screws that secure the computer c over and remove
the cover.
(3) Touch any part of the metal case to grou nd yourself. This will
discharge any static e lectricity that could damage your PC I card or
computer.
(4) Locate an empty PCI expansion slot
(5) Remove the port cover from the back of the PC that corresp onds to
the PCI slot you sel ected. If the por t cover is secured w ith a screw,
remove the screw and place it in a safe spot . You will need to
reuse the screw to ins tall the PCI car d.
(6) Insert the PCI Card into the slot. Apply pressure as needed until
the Card is fully sea ted.
(7) Now secure the PCI Card with the scre w that you removed in s tep
#5.
(8) Replace the computers cover.
(9) Replace your computer power cable and inser t the Belkin USB 2.0
driver installation C D into your computer s CD-ROM drive.
(10) Turn on power and start the Windows operat ing system.
Hardware Installation