Quick Setup For PS/2 Connections
For PS/2 Connections
1.Be sure that your computer is powered off.
2.Connect the receiver to your computer’s PS/2
ports. The receiver has a
adapter is for the mouse). There is also a diagram on
the top connector for identification. Your computer will either have a matching color scheme or an illustration next to the port, or both (See Fig. 1).
3.Install the batteries into your keyboard and mouse. Please make sure you follow the diagram on the inside of the battery compartment to ensure that you install them correctly.
4.Power on your computer.
5.The receiver automatically scans for and synchronizes the keyboard and mouse when you power on the computer. Your keyboard and mouse should now be functioning.
6.If synchronizing does not occur automatically, please refer to the information on “Synchronizing” in the Troubleshooting section at the end of this User Manual.
3
19/5/05 11:28:27 am |
