Sharp LC-32SH330E Hdmi overscan, Manual OAD Download, No Signal Off, No Operation Off, SW Ver

TV menu

HDMI overscan

When you watch TV via HDMI input source, you could use this function to enlarge the picture. It may have few loss of video content.

1.Press MENU on the remote control and select Features > HDMI Scan info

2.Press ≤≥ to select one of the following:

•Select Auto to scan the picture automatically.

•Select Underscan to disable.

•Select Overscan to activate.

3.Follow the on-screen instructions to exit.

Manual OAD Download

When you get the software updating news from the retailer or internet, you can update the operation software using the OAD (Over Air Download) Download. The updated software data will be transferred through the TV signal.

1.Press MENU on the remote control and select Features ≥ OAD ≥ Manual OAD Download.

2.Press OK or ≥ to enter.

3.Follow the on-screen instructions to download the updated software.

NOTE

•Please do not switch off the TV during the downloading process.

No Signal Off

When set to “On”, the TV will automatically enter standby mode if there is no signal input for 15 minutes.

NOTE

•Even if a TV programme finishes, this function may not operate because of interference from other TV stations or other signals.

No Operation Off

The TV will automatically enter standby mode if no operations are performed in three hours if “On” is selected.

NOTE

•Five minutes before the TV enters standby mode, the remaining time displays every minute.

Reset Default

When you activate the Reset Default, the TV enters to first time installation.

1.Press MENU on the remote control and select Features ≥ Reset Default.

2.Press OK or ≥ to enter.

3.Select OK and press OK on your remote control to confirm.

4.Follow the on-screen instructions to reset your TV settings.

DivX® Setup

This is the function to confirm your registration code. You need to register the code at www.divx.com.

EEDivX® Registration (VOD)

You can find your registration code on this menu. You need to register the TV at www.divx.com before playing the DivX® content.

1.Press MENU on the remote control and select Features ≥ DivX® Registration.

2.Press OK or ≥ to enter.

3.Follow the on-screen instructions to exit.

EEDivX® Deactivation (VOD)

You can find your deactivation code on this menu. You need to deactivate the TV at www.divx.com to release the registration.

1.Press MENU on the remote control and select Features ≥ DivX® Deactivation.

2.Press OK or ≥ to enter.

3.Follow the on-screen instructions to exit.

SW Ver.

Display the Software version.

1.Press MENU on the remote control and select Features ≥ SW Ver.

2.Press OK or ≥ to enter.

3.Press <> to look for the software version information.

19