TV menu
Use Sound Mode
Apart from manually adjusting sound settings, you can use Sound Mode to set your TV to a predefined sound setting.
1.Press MENU on the remote control and select Sound.
2.Press OK or ≥ to enter Sound and select
Sound Mode.
3.Press ≤≥ to select one of the following settings:
•Personal
•Music
•Speech
4.Follow the
TV
The first time you set up your TV, you are prompted to select an appropriate menu language and to perform automatic installation of TV and digital radio channels (If available).
This chapter provides instructions on how to reinstall channels as well as other useful channel installation features.
NOTE
•
Select a digital audio language
1.Press MENU on the remote control and select TV.
2.Press OK or ≥ to enter TV menu.
3.Press <> to select 1st Audio or 2nd Audio.
4.Highlight your selection and press ≤≥ to select an audio language.
5.Follow the
NOTE
•If your selected audio language is not broadcasted, the default audio language will be displayed.
Automatically install channels
This section describes how to search and store channels automatically. Instructions are for both digital and analogue channels.
Step 1: Select your Tuner Mode
1.Press MENU on your remote control and select TV ≥ Tuner Mode.
2.Press ≤≥ to select Antenna or Cable.
3.Follow the
Step 2: Select your country
Select the country where you are located. The TV installs and arranges channels according to your country.
1.Press MENU on the remote control and select TV ≥ Country.
2.Press ≤≥ to select your country.
3.Follow the
Step 3: Automatic channel scan
Your TV searches and stores all available digital and analogue TV channels as well as all available digital radio channels.
1.Press MENU on the remote control and select TV ≥ Channels.
NOTE
•You are prompted to enter current password to enter
Channels if Channel Block /Parental Guidance /
Input Block in the Parental menu is not the default setting.
2.Select Channel Scan and press OK or ≥ and select ATV only or ATV and DTV to start channel installation. The installation may take a few minutes.
3.When complete, follow the
EEUpdate Scan
Update Scan has similar function with Channel Scan. The difference is you could update channel list without erasing the original information.
NOTE
• This function is for Antenna mode only.
1.Press MENU on the remote control and select TV ≥ Channels.
NOTE
•You are prompted to enter current password to enter
Channels if Channel Block /Parental Guidance /
Input Block in the Parental menu is not the default setting.
2.Press <> to select Update Scan and press OK or ≥ to start channel update.
3.When complete, follow the
13
